SeaMetrics WMP101 25 mm 1 inch NPT(F) open bore magnetic flow meter with pulse output 7.6 to 416 lpm 10.3 bar (150 psi)

SeaMetrics WMP101 25 mm 1 inch NPT(F) open bore magnetic flow meter with digital display and pulse output
7.6 to 416 lpm
10.3 bar (150 psi) max working pressure @ 70˚F (21˚C)
Operating temperature range: operating: 10˚ to 130˚ F (-12˚ to 54˚C), non-operating: -40˚ to 176˚ F (-40˚ to 80˚C)
Features:
- power: (WMP101 only) 10–30 Vdc @ 60 mA maximum (15 mA average)
- note: using an unregulated power supply >18 Vdc may damage the meter due to AC line input voltage fluctuation
- pulse output signal: (WMP101 only) current sinking pulse, opto-isolated, 32 Vdc maximum @ 10 mA maximum
- plastic body mag-meter
- no moving parts
- minimal straight pipe required
- corrosion resistant
- built-in rate and total indicator
- simple as a mechanical meter
- open bore magnetic flow meter
- no moving parts
Flow range:
- 7.6 to 416 lpm
- accuracy to 99%
Display:
Displays overall total volume and batch total volume
Flow rate allows for US gallons or litres per minute
Glass-reinforced polypropylene material
No moving parts to fail during use
Self calibrating meter
Liquid temperature range from 0ºC to 66ºC (0ºC to 150ºC)
The display reads 6 digits for flow rate, 8 digits for total and 1 decimal place reading in tenths
There are 3 photo-eyes located on the face of the flow meter
Important:
These are not push buttons, to activate you must hold your finger over the photo-eye for 2-4 seconds
Applications include:
Most conductive liquids
Water
Fluids that contain some solids
Note:
Not suitable for petroleum based liquids