SeaMetrics WMP101 80 mm (3 inch BSP fittings included) open bore magnetic flow meter with pulse output 53 to 2500 lpm 10.3 bar (150 psi)

SeaMetrics WMP101 80 mm (3 inch BSP fittings included) open bore magnetic flow meter with digital display and pulse output
53 to 2500 lpm
10.3 bar (150 psi) max working pressure @ 70˚F (21˚C)
Operating temperature range: operating: 10˚ to 130˚ F (-12˚ to 54˚C), non-operating: -40˚ to 176˚ F (-40˚ to 80˚C)
Features:
- power: (WMP101 only) 10–30 Vdc @ 60 mA maximum (15 mA average)
- note: using an unregulated power supply >18 Vdc may damage the meter due to AC line input voltage fluctuation
- pulse output signal: (WMP101 only) current sinking pulse, opto-isolated, 32 Vdc maximum @ 10 mA maximum
- plastic body mag-meter
- no moving parts
- minimal straight pipe required
- corrosion resistant
- built-in rate and total indicator
- simple as a mechanical meter
- open bore magnetic flow meter
- no moving parts
Flow range:
- 53 to 2500 lpm
- accuracy to 99%
Display:
Displays overall total volume and batch total volume
Flow rate allows for US gallons or litres per minute
Glass-reinforced polypropylene material
No moving parts to fail during use
Self calibrating meter
Liquid temperature range from 0ºC to 66ºC (0ºC to 150ºC)
The display reads 6 digits for flow rate, 8 digits for total and 1 decimal place reading in tenths
There are 3 photo-eyes located on the face of the flow meter
Important:
These are not push buttons, to activate you must hold your finger over the photo-eye for 2-4 seconds
Applications include:
Most conductive liquids
Water
Fluids that contain some solids
Note:
Not suitable for petroleum based liquids